BEA LZR-MICROSCAN T Mode D'emploi page 9

SET-UP
CAUTION: No safety present during learn cycle.
Be sure to walk-test door after set-up is complete and perform new Learn anytime door operator, control, sensor, or
hub is adjusted.
1
Program hub according to desired
Menu 1 (Basic) items
settings.
MUST be programmed (pg 10).
4
Push and hold adjustment knob
for three (3) seconds, until blue
LED begins to flash.
6
Automatic Teach-In will begin with
"door closed" Learn.
9
"Door closing" Learn.
12
Once Teach-In is complete, LCD
displays home screen, Blue LED is
off, and orange LED is on.
NOTES:
1. Verify Home Switch is
"making/breaking" by
observing orange LED on hub.
Home Switch should be set as
sensitive as possible and break
within a few degrees of door
movement.
75.5753.14 LZR-MICROSCAN T 20180208 75.5753.14 LZR-MICROSCAN T 20180208
2
Network icon will appear for
approximately five (5) seconds.
5a
"CLEAR AREA" will display and
countdown will begin. Clear area
around door on both sides.
7
"Door opening" Learn.
Door will open automatically.
10
After Teach-In is complete, a
floppy disk will be displayed.
TEACH-IN STAGE
Prior to Learn
Network Icon
Clear Area
Door Closed Learn
1
Door Opening/Open/
Closing Learn
Floppy Disk
Hour Glass
Learn Complete
Return to Learn screen.
5b
For dual-egress doors, Push Door
icon will display. Push right door
(Door B) open at least 10 degrees.
"Door open" Learn.
11
Hour glass will be displayed for
approximately thirty (30) seconds
while all Learn data is saved.
HUB LED
blue flashing
blue flashing & orange solid
blue flashing & orange solid
blue flashing & orange solid
blue flashing
blue flashing & orange solid
blue flashing & orange solid
orange solid
3
8
SENSOR LED
red/green flashing
red solid
red/green flashing
green flashing
green flashing
green solid -> green flashing
green flashing > red solid >
red/green flashing
green solid
Page 9 of 16 Page 9 of 16