Operating Instructions; Climate Class; Ambient Temperature - Pando PVMAV 45-18 Manuel D'utilisation Et Installation

INOXPAN S.L.

4. OPERATING INSTRUCTIONS

This device is designed to work within certain ambient temperatures. The climate class is
specified on the specifications plate.
The appliance may malfunction if it is left working for a long period of time outside the specified
temperature range. For example, placing the unit in extreme heat or cold conditions could cause
fluctuations in the internal temperature. The range of 5ºC and 20ºC (41ºF and 68ºF) will not be
achieved.

Climate class

SN
N
ST
T
NOTE: Units without a heater will not raise the internal temperature if ambient the temperature is
lower than the pre-set level.
ATTENTION:
• When using the appliance for the first time, or after restarting after a long period of
inactivity, the selected temperature may vary a few degrees from the temperature
indicated on the LED panel. This is normal and is due to the activation time. Once the unit
has been in operation for a few hours, everything will return to normal.
• If the unit is disconnected, there is a power cut or it is switched off, you will have to wait
for 3 to 5 minutes before restarting the unit. If you try to start the unit before, it will not
turn on.

Ambient temperature

+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
20
WINE CABINETS