Product Characteristics - Pando PVMAV 45-18 Manuel D'utilisation Et Installation

INOXPAN S.L. WINE CABINETS

2. PRODUCT CHARACTERISTICS

•Equipped with independent shelves with one, two or three temperature areas, depending on the
model.
•Variable electronic temperature control with a digital screen and tactile operation.
•Temperature can be adjusted from 5°C to 20°C (41°F to 68°F) in any of the compartments and
can be displayed in degrees Fahrenheit or Centigrade.
•It can be configured for long-term storage temperature or specific serving temperature for red
/white/ sparkling wines.
•Cooling and heating (depending on model) for perfect storage and/or serving conditions.
•A dynamic cooling compressor to guarantee air circulation inside with a uniform distribution of
temperature and humidity.
•Blue LED light inside with an ON/OFF switch. Operation mode and display mode.
•Alarm system warning of malfunctioning due to open door.
•The standby mode "DISPLAY OFF" will disconnect the display lights, interior light and audible
alarms. Pre-existing cooling operations will continue functioning normally.
•Temperature memory function-If the power supply is cut off (voltage surge, circuit breaker, etc.)
and then reconnected, the unit will continue operating at the last selected temperature.
•Automatic defrosting with evaporation of water from defrosting.
•Reversible tempered glass door, with a double/triple panel, smoked glass to protect the wine
from UV light and offer an attractive presentation with little condensation and a low noise level.
•Steel external and internal body in a mat black finish with interior coating also finished in black,
offering good performance, long life and stability. This mat finish avoids excessive light damaging
the maturing process.
• Glass door or glass door with stainless steel frame, and with or without stainless steel handle.
•Shelves made of solid beech wood sliding out and adjustable to offer maximum convenience
and flexibility to adapt to different sized bottles.
•Coolant respectful with the environment with insulating foam.
•Humidity control system (Water tank)
NOTE: Characteristics and specifications may be subject to modifications without prior notice.
10