Icon Description - Bryton Rider 40 Guide De Démarrage Rapide

Connect, Sync, and Charge
1. Connect Rider 40 to a PC using the supplied mini USB cable.
2. Download the Bryton Bridge 2 application at bb.brytonsport.com
and sync with Rider 40.
Icons
icon Description
Bike in used
Bike 1
Bike 2
GPS Signal Status
No signal (not fixed)
Weak signal
Strong signal
Power Status
Full battery
/ Half battery
Low battery
Note: Only the active icons are displayed on the screen.
4
Keep Rider 40 connected to
the PC to charge the battery.
reset
Use a mini USB cable to
Warm UP
(1/12)
Target
107 134
min bpm max
connect to a PC.
Duration
15
min
Note: For first time use, charge the
battery for about 4 hours.
icon Description
Heart Rate Sensor Active
Cadence Sensor Active
Speed Sensor Active
Power Meter Sensor
Active
Train & Test mode
Meter mode
Follow Track mode
Log Record in Progress
Combo Sensor Active