Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Concealed Duct High Static Pressure
12
TROUBLESHOOTING
Confirmation and check
When an error occurred in the air conditioner, an error code
and indoor UNIT No. appear on the display part of the remote
controller.
The error code is only displayed during the operation.
If the display disappears, operate the air conditioner
according to the following "Confirmation of error log" for
confirmation.
Error code
Confirmation of error log
When an error occurred on the air conditioner, the error log
can be confirmed with the following procedure. (The error
history is stored in memory up to 4 errors.)
The log can be confirmed from both operating status and stop
status.
2
3
1
Procedure
When pushing
and
buttons at the same time for 4
seconds or more, the following display appears.
If
is displayed, the mode enters in the error log mode.
• [01: Order of error log] is displayed in CODE No..
• [Error code] is displayed in CHECK.
• [Indoor unit address in which an error occurred] is
displayed in Unit No..
Indoor UNIT No. in
which an error occurred
1
2
Procedure
Every pushing of
error log stored in memory is displayed in order.
The numbers in CODE No. indicate CODE No. [01] (latest)
[04] (oldest).
REQUIREMENT
Do not push
button because all the error log of the indoor
unit will be deleted.
3
Procedure
After confirmation, push
display.
– 38 –
Installation Manual
button used to set temperature, the
button to return to the usual
EN
38-EN
Publicité
Chapitres
Table des Matières
