Publicité
User Manual
Introduction
Thank you for purchasing the LINDY 2 Port Bi-Directional 4K HDMI Switch. This device can be used to
switch between two sources to show one display or can be used to display a signal on one of two
screens. The switch can support up to 4K and 3D 1080p resolutions.
Features
Fully compliant with 1.4 HDMI specification
Supports 4K, 3D 1080p resolutions
HDCP and CEC supported
Cable lengths of 5m in and 5m out supported
Specification
HDMI Type A Female connectors
Dimensions: 50x52x20mm (WxDxH)
Maximum current: 15ma
Installation
Connect the cables from your source devices and your displays before powering on any devices.
Power on your source device first, then power on your displays. Use the switch to select your desired
channel.
Notes on using DVI equipped devices:
To connect DVI equipped devices you can use either modular DVI/HDMI adapters or DVI/HDMI adapter
cables. Be aware that DVI is a 'video only' interface; audio signals are not supported when using DVI source
devices. Also, please note that DVI equipped displays must support HDCP signal decoding to display HDCP
protected HDMI signals. HDCP compatible displays will normally feature the HD Ready logo.
LINDY
Bi-Directional
HDMI Switch
LINDY
Bi-Directional
HDMI Switch
English
Publicité
