Program Mode - Hamilton Beach SC30 Mode D'emploi

Program Mode

1
Press ON (I).
5
Press arrows to select heat setting.
6
w WARNING
Food must be hot enough to prevent bacterial growth before using Warm setting. The Warm setting should
only be used after a recipe has been thoroughly cooked. Do not reheat food on Warm setting. If food has
been cooked and then refrigerated, reheat it on LOW or HIGH and then switch to Warm. Visit foodsafety.gov
for more information.
2
Press PROGRAM. Cooking Time
will illuminate.
6
Press ENTER to start unit and a
3-second beep will sound.
NOTE: Unit will automatically
start in 20 seconds if ENTER is not
pressed.
Food Safety Hazard.
3
Press arrows to select cooking
time.
7
Display will alternate between heat setting and remaining time. At
the end of cook time, slow cooker will automatically switch to Warm
setting and unit will turn off and display OFF after a total of 14 hours.
NOTE: If Warm setting selected, unit will turn off and display
OFF after selected time.
4
Press ENTER. Heat Setting will
illuminate.
8