Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Specifications . Installation
Specifications
Power supply required...................................115V, 60 HZ.
Liquid Temp. Range..........................32°F to 70°F(0°-21°C)
Individual Branch Circuit Required (min.).............15 Amps
Discharge:
Check valve..................................1-1/4" Slip/1-1/2" Slip
NOTICE Do not reduce size of discharge pipe or hose
below 1-1/4" diameter. If discharge is too small, pump will
overheat and fail prematurely.
Float Switch Installation
Models equipped with vertical switches require some
assembly.
For parts or assistance, call Flotec Customer Service at
This pump is designed for use in a residential sump only.
Only pump water with this pump.
NOTICE This unit is not designed as a waterfall or fountain
pump, or for applications involving salt water or brine!
Use with waterfalls, fountains, salt water or brine will void
warranty.
Do not use where water recirculates.
Not designed for use as a swimming pool drainer.
Installation
The Easy Sump is pre-plumbed up to the check valve.
The system includes the pump, PVC pipe, check valve
and vertical float switch.
Needed:
Screwdriver, tape measure, hacksaw, cable ties
1.
Unplug existing sump pump and place power
cord and piggyback switch out of the way of
work and water.
2.
Measure height of Easy Sump from base to top of
check valve. Subtract 3/4".
Drop the tape measure into the bottom of sump
pit and mark the cut line on the discharge pipe
(3/4" less than total height of Easy Sump from
base to top of check valve).
3.
Use hacksaw to cut horizontally along cut line
completely through pipe.
NOTICE Depending on where your current check
valve is located, there may be excess water. Let
the water drain/drip into the sump pit.
4.
Remove old sump from sump pit.
NOTICE Remove all sand, clay, and gravel before
installing.
5.
Place Easy Sump into sump pit. Make sure
vertical float switch can operate freely inside
sump pit.
6.
Run power cord and piggyback switch up
through the correct hole in sump pit cover.
1-800-365-6832
3
Publicité
Table des Matières
