Limitations On Use - Blatchford Epirus Instructions D'utilisation

3 Function
This device comprises an e-carbon toe and independent heel spring combined with resilient
multi-axial ankle movement, ankle function can be customised to the individuals requirements
via the use of interchangeable buffers.
Heel and toe springs are attached to the carrier using titanium and stainless steel screws. The foot
is wrapped in a UHM PE sock which is in turn surrounded by a PU foot shell.
4 Maintenance
Maintenance must be carried out by competent personnel.
It is recommended that the following maintenance is carried out annually:
• Remove the foot shell and glide sock, check for damage or wear and replace if necessary.
• Check all screws for tightness, clean and reassemble as necessary.
• Visually check the heel and toe springs for signs of delamination or wear and replace if
necessary. Some surface damage may occur after a period of use, this does not affect the
function or strength of the foot.
• Remove the dome, check the condition of the plantar flexion buffer and replace if necessary
The user should be advised:
Any changes in performance of this device must be reported to the practitioner,
changes in performance may include:
• Increase in ankle stiffness
• Reduced ankle support (free movement)
• Any unusual noises
The practitioner must also be informed of any changes in body weight and/or activity level.
The user should be advised that a regular visual check of the foot is recommended, signs of wear
that may affect function should be reported to their service provider (e.g. significant wear or
excessive discoloration from long term exposure to UV).
Cleaning
Use a damp cloth and mild soap to clean outside surfaces, do not use aggressive cleansers.

5 Limitations on Use

Intended life
A local risk assessment should be carried out based upon activity and usage.
Lifting loads
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment
Avoid exposing this device to corrosive elements such as water, acids and other liquids. Also
avoid abrasive environments such as those containing sand for example as these may promote
premature wear.
Exclusively for use between -15 ˚C and 50 ˚C (5 ˚F to
122 ˚F).
We recommend using only Blatchford products with this
device.
5
938276S/3-1219