Lindy 38052 Manuel Utilisateur page 3

User Manual
Introduction
Thank you for purchasing the LINDY 8x8 4K HDMI Matrix with remote control and RS232
control. This high performance device offers you the maximum convenience in HDMI signal
distribution when you have multiple HDMI sources and displays to connect together. Each of the
eight HDMI inputs can be directed to any of the eight HDMI outputs, so your displays can show
up to eight different sources at the same time. When the HDMI signal is progressed through the
Matrix it is retimed and level compensated, so that the output is a regenerated HDMI signal that
can travel another 10 meters. The Matrix supports resolutions up to 4Kx2K@30Hz plus 1080P
3D@60Hz and also supports independent EDID control.
Package Contents
 8x8 4K HDMI Matrix
 12V PSU
 LINDY User Manual
 IR Remote Control inc CR2025 battery
 Rackmount Brackets
 RS232 Cable
Features
 HDMI 1.4, HDCP 1.1, DVI 1.0 compliant
 Switch between devices using front push buttons, IR remote control, or RS232/RJ45 via a
PC
 Supports resolutions up to 4Kx2K@30Hz, 1080P@120Hz & 1080P 3D@60Hz
 Deep colour support: 24/30/36/48 bit
 Supports LPCM 7.1CH, Dolby Tru HD, Dolby Digital Plus & DTS-HD Master Audio
transmission
 Video bandwidth: 300Hz
 Supports EDID cloning and selection from presets on all input ports
 Front panel LCD display
 Rack mountable
Installation
Make sure all your devices are switched off before making any connections. Once all the
connections have been made, switch on the devices in this order: displays, HDMI Splitter,
source devices.
Operation
Front
1. LCD Display: Shows the status of the input/output selection
2. IR Receiver: This needs to be visible at all times if using the IR remote to switch between
devices
English