Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
1. Press the rear power switch selecting position « I ». The LED next to
the selector will light up.
2. Place the waste bucket in the correct position. Stuck to the rear wall
of the blender.
Take care! If your machine works at 115V and the LED flashes, the container
has been placed incorrectly. Return to the Stand-By position
place the waste container on the rear wall of the blender.
under the juice outlet and select the desired position
The position
•
strawberry, grapes...). The position
broccoli, celery, beetroot...).
3. Insert the fruit or the vegetable through the feeding tube in the cover
and press down with the pusher.
4. To stop the machine, turn the selector to the
5. Turn the Non Drip Tap
not juicing.
Fig 4
Fig 1
Fig 1
Fig 2
is ideal for SOFT FRUITS (apple, pineapple, watermelon,
180º
to avoid dripping of the juice when you're
Fig 2
••
for HARD VEGETABLES (carrots,
(STAND BY)
Fig 3
(
)
and
Fig 3
Place a jug
(• or
••).
position.
Fig 3
Fig 4
Publicité
Table des Matières
