Xylem WTW pH 3110 Guide De Démarrage Rapide page 5

pH 3110
Status display
indicators
Socket field
connections
Initial
commissioning
ba75782y04 05/2017
AutoCal Calibration with automatic buffer recognition (buffer set:
TEC Technical buffers )
AutoCal Calibration with automatic buffer recognition (buffer set:
DIN DIN buffers )
ConCal Calibration with any buffers
CalError An error occurred during calibration
LoBat With battery operation: Batteries almost empty
AR Stability control (AutoRead) is active
TP Temperature measurement active
TIME Setting of calibration interval
2
4 1
1 pH combination electrode
2 Reference electrode
3 Temperature sensor
4 Service interface
1 Insert the supplied batteries.
When doing so make sure that the poles of the batteries are
positioned correctly.
2 Switch on the meter with the <On/Off> key.
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD and on
the Internet under www.WTW.com.
3
EN
English
5