Care And Cleaning - FoodSaver V2860 Guide De Référence

Care and Cleaning

Never immerse the unit or power cord and plug in water or any
other liquid. Always unplug the unit before cleaning.
Wipe over the body of the appliance with a soft dry cloth.
Remove and empty the drip tray
soapy water or place it in the top rack of a dishwasher. Dry thoroughly
before refitting.
Check the upper gasket , lower gasket
A
tray to make sure they are free from food debris. Wipe the gaskets
with a warm soapy cloth if needed.
cleaning. Clean them with warm, soapy water. Dry thoroughly then
carefully refit.
A
E
D
To keep your FoodSaver appliance operating effectively, we
recommend that you replace the gaskets every year. To order
replacements, please visit www.foodsaver.co.uk.
9
after each use. Wash it in warm
E
and around the drip
D
The gaskets may be removed for
www.foodsavereurope.com
Storage
1. Close the lid and move the latch
( ). This is enough to secure the lid but avoids compressing the
gaskets (which may cause incorrect functioning of the unit).
2. Press and hold the Upright storage button
of the appliance until it is in the upright position.
3. Release the button.
To return the unit to the operating position, press and hold the Upright
storage button and lower the front of the appliance.
To store the accessory hose, fit the two hose clips
them onto the pins on the underside rear of the appliance as shown
then wrap the hose around the clips.
K
to the storage position
I
then raise the front
H
H
by pushing
K
K