FoodSaver V2860 Guide De Référence page 2

English
Français/French
Deutsch/German
Español/Spanish
Português/Portuguese
Italiano/Italian
Nederlands/Dutch
Svenska/Swedish
Suomi/Finnish
Dansk/Danish
Norsk/Norwegian
Installation of a plug (UK only)
If the plug is not suitable for the socket outlets in your home, it
can be removed and replaced by a plug of the correct type. If you
remove the plug it must not be connected to a 13 amp socket and
the plug must be disposed of immediately.
NOTE: If the terminals in the plug are not marked or if you are
unsure or in doubt about the installation of the plug please contact a
qualified electrician.
If a 13A 3-pin plug is fitted, it must be an ASTA approved plug,
conforming to BS1363 standard. Replacement fuses must be BSI or
ASTA BS1362 approved.
The wires in the mains lead are coloured as such:
• BROWN - LIVE
• BLUE - NEUTRAL
Please note that the colour of these mains wires may not correspond
with the colour markings that identify the terminals in your plug.
The BROWN coloured wire must be connected to the terminal, which
is marked with the letter "L" or is coloured RED.
The BLUE coloured wire must be connected to the terminal, which is
marked with the letter "N" or is coloured BLACK.
DO NOT CONNECT either of these wires to the earth terminal in the
plug. The earth terminal plug is marked with the letter "E", or with the
earth symbol , or coloured GREEN, or GREEN and YELLOW.
Blue
(Neutral)
5
11
17
23
29
35
41
47
53
59
65
Do Not Connect
Mains Wires Here
3A
Fuse
CORD
Brown
GRIP
(Live)