Power Related; Before Use; Cleaning And Maintenance - Samsung POWERbot SR1AM7040W Série Guide D'utilisation

Safety information

Power related

WARNING
f To prevent the risk of electric shock or
fire:
– Do not damage the power cord.
– Do not pull the power cord too hard or
touch the power plug with wet hands.
– Use only power sources that provide
between 100 and 240 volts. Do not plug
the POWERbot into a multi-outlet power
strip. Do not place the power cord where it
can be stepped on, tripped over, or where
the POWERbot can run over it.
– Do not use a damaged power plug, power
cord, or loose power outlet.
f Clean dust or any foreign matter off the
prongs of the power plug.
– There is a risk of electric shock or
malfunction.

Before use

WARNING
f Do not use the POWERbot near
combustible materials.
– Do not place or use near candles, desktop
lamps, or fireplaces or near combustible
materials such as gasoline, alcohol, thinners
etc.
f The POWERbot is intended for specific
household use. Do not use it in an attic,
basement, storage area, industrial
building, outside, in places with moisture
(such as a bathroom or laundry room), on
a table or on shelves.
– The POWERbot can be damaged or
malfunction.
f Be sure the POWERbot does not pass
through or touch any kind of liquid.
– The POWERbot can be severely damaged
and it may contaminate other areas if the
wheels pass through liquid.
f Attach the boundary markers to places
where the POWERbot may fall such as
the top of a staircase or a bannister to
prevent product damage and injury.
– Please keep the cliff sensor clean at all
times for safety.
f Do not spill any liquid on the docking
station.
– There is a risk of fire or electric shock.
f Do not use the docking station for
anything other than its intended purpose.
– There is a risk of fire or severe damage to
the docking station.
f Always keep the cliff sensor clean for
your safety.
WARNING
f If any abnormal sounds, smells, or smoke
come from POWERbot, immediately shut
off the POWERBOT using the emergency
switch on the bottom of POWERbot, and
then contact a Samsung service center.
WARNING
f If the power cord is damaged, contact a
Samsuing service center to get it replaced
by a certified repairman.
– There is a risk of fire or electric shock.
f Contact a Samsung Electronics service
center if you need to replace the batteries.
– Using batteries from other products can
cause the POWERbot to malfunction.
ENGLISH-08
In use
Cleaning and
maintenance