Power Related; Before Use; Cleaning And Maintenance - Samsung POWERbot VR2AR72 Série Guide D'utilisation

Safety information
WARNING
f Please prevent any risk of electric shock
or fire.
– Do not damage the power cord.
– Do not pull the power cord too hard or
touch the power plug with wet hands.
– Do not use a power source other than 100-
240 V~ and also do not use a multi outlet to
supply power to number of devices at the
same time. (Do not leave the cord carelessly
on the floor.)
– Do not use a damaged power plug, power
cord or loose power outlet.
f Clean dust or any foreign matters on the
pin and contact part of the power plug.
– There is a risk of electric shock or
malfunction.
WARNING
f Do not use POWERbot near a heater or
combustible materials.
– Do not use POWERbot near fire or flame
such as a movable heater, a candlelight,
a desk lamp, a fireplace etc. or in a place
where combustible materials such as
gasoline, alcohol, thinner etc. exist.
f Make sure there are no dangerous objects
around the POWERbot's cleaning area to
prevent collision and unplug any electric
heaters or fans.
f The POWERbot is intended for household
use therefore do not use it in an attic,
basement, storage, industrial building,
out of indoor space, places with moisture
(such as bathroom, laundry), on the table
or shelves.
– The POWERbot can be damaged or
malfunction.
f Be sure POWERbot does not pass through
or touch any kind of liquids.
– The POWERbot can be severely damaged
and it may contaminate other areas if the
wheels pass through liquid.
1_VR7200_EN_DJ68-00827B-00_AA.indd 8

Power related

Before use

ENGLISH-08
f Attach the boundary markers on a place
where the POWERbot may fall such as
a stair or banister to prevent product
damage and injury.
– Please keep the cliff sensor clean all the
time for safety.
f Do not spill any liquids on the docking
station.
– There is a risk of fire or electric shock.
f Do not use the docking station for
anything other than its intended purpose.
– There is a risk of fire or severe damage to
the docking station.
f Always keep the cliff sensor clean for
your safety.
In use
WARNING
f If any abnormal sounds, smells or smoke
come from POWERbot, immediately shut
off the emergency switch at the bottom of
POWERbot and contact a service center.
Cleaning and
WARNING
maintenance
f When power cord is damaged, contact
a service center to get it replaced by a
certified repairman.
– There is a risk of fire or electric shock.
f Please check with a Samsung Electronics
service center when exchanging batteries.
– Using batteries from other products can
cause malfunction.
Before use
CAUTION
f Insert the dustbin before using
POWERbot.
f Be careful with the followings for proper
automatic recharging.
– Always turn on the power of the docking
station.
– Install the docking station where POWERbot
can easily find.
– Do not leave any object in front of the
docking station.
2019-03-19 오후 5:25:20