Using the remote control
5 Manual clean mode & Direction control
Move forward
Turn left
Turn right
✻ ✻ Moving backward is not available.
6 Point cleaning
Available only with C type remote controllers.
You can use the remote control to direct the POWERbot to clean a desired spot
while the POWERbot is cleaning.
Point the red light on the floor within 1.6 ft (0.5 m) of the POWERbot's location.
Press and hold the Point cleaning button to move the red light to the desired spot. The POWERbot
will follow the light while cleaning.
Operating distance of the remote control
Height of the
remote control
Operating distance
Inserting batteries
Open the battery cover by lifting it
up while pressing the locking tab.
Insert the batteries as shown in
the illustration, and then close the
cover until it clicks into place.
1.6 ft
(0.5 m)
remote control
Select to move forward
Select to turn left
Select to turn right
Height of the
1.6 ft (0.5 m) 3.3 ft (1 m) 4.9 ft (1.5 m)
Operating
About 4.9 ft
distance
(1.5 m)
ENGLISH-20
About 6.6 ft
About 9.8 ft
(2 m)
(3 m)