Using Energy-Saving Mode - Samsung POWERbot SR1AM7040W Série Guide D'utilisation

About the boundary markers
Boundary
markers
Where a raised spot exceeds 1.9 in (5 cm)
boundary
markers
Where a threshold is higher than 0.6 in (1.5 cm)

Using Energy-saving mode

You can select the Energy-saving mode to save energy during battery charging. Energy-saving mode
turns off all functions except battery charging. Use it to reduce power consumption while you are away
from home for an extended period of time.
How to select or cancel
Note
f If you select the Auto/Max/Manual clean mode or press the Point cleaning button, the
Energy-saving mode will be cancelled.
f When Energy-saving mode is on, setting the schedule will cancel Energy-saving mode.
– If you select the Energy-saving mode after setting the schedule, the schedule will not be
cancelled.
f If the docking station is off, Energy-saving mode will be cancelled.
To prevent the POWERbot from entering the following areas, place
the boundary markers on the floor in an
about 5.9 in (15 cm).
About 5.9 in
(15 cm)
About 1.9 in
(5 cm)
Above 0.6 in (1.5 cm)
Press for 5 sec.
Where there is a slide, swing, fireplace, or any
flammable substance or moisture.
Where there is risk of falling such as near
stairs, porches, or guardrails.
Displayed icon
✻ ✻ About 3 seconds
later, the previous
indicator will
appear.
ENGLISH-17
shape at intervals of
About 5.9 in (15 cm)
Boundary
markers
Boundary
markers
<SR1AM7010UW
series only>
Blinking Blinking