Point Cleaning - Samsung POWERbot SR1M70 Série Mode D'emploi

5 Manual clean mode & Direction control
Move forward
Turn left
Turn right
✻ Moving backward is not available.

6 Point cleaning

Available only with C, D type remote controllers.
You can use the remote control to point and clean the desired spot while the
POWERbot is in cleaning process.
Point the red light on the floor within 0.5 m around POWERbot's location.
Press and hold the Point cleaning button to move the red light to the desired spot. The POWERbot
will follow the light while cleaning.
Operating distance of the remote control
Height of the
remote control
Operating distance
Inserting batteries
Open the battery cover by lifting it
up while pressing the locking tab and
insert the batteries as shown in the
illustration. Then, close the cover until
it clicks into place.
1_VR7000_EN_DJ68-00763K-08_SW.indd 19
0.5 m
Height of the
remote control
Operating
distance
ENGLISH-19
Select to move forward
Select to turn left
Select to turn right
0.5 m 1 m
About 1.5 m About 2 m
1.5 m
About 3 m
2017-12-01 오후 5:07:05