Installation; Electrical Connection - CTC Wireless room sensor Instructions D'installation Et D'entretien

12. Installation

12.1

Electrical connection

• Open the front panel of the heat pump.
• Move the existing CAT5 cable, which is connected to the bottom
edge of the display, to the connection box (3) and connect it to the
left-hand output.
• Use the CAT5 cable (4) supplied with the room sensor to connect
the connection box (3) and the display.
• Connect the antenna (2) to the connection box. Fix the cable in
place with the cable fastener.
2
3
4
English
4
CTC Wireless room sensor
EN
29