Ryobi RPH26E Manuel D'utilisation page 14

Keep all bystanders, children and pets at least 15 m
the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces.
Do not touch area around the exhaust, silencer or
engine of the unit, these parts get hot during operation.
for carburetor adjustments.
Inspect the unit before each use for loose fasteners, fuel
leaks, etc. Replace any damaged parts before use.
It has been reported that vibrations from hand-held
tools may contribute to a condition called Raynaud's
include tingling, numbness and blanching of the
fingers, usually apparent upon exposure to cold.
extent of exposure may contribute to the condition.
Hereditary factors, exposure to cold and dampness,
contribute to the development of these symptoms.
There are measures that can be taken by the operator
to possibly reduce the effects of vibration:
b) After each period of operation, exercise to increase
blood circulation.
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician
about these symptoms.
Mix and store fuel in a container approved for fuel.
refueling site before starting the engine.
performing adjustments or maintenance or storage.
secure the unit from moving before transporting in a
vehicle.
English (Original instructions)
DESCRIPTION
1. Primer Bulb
2. Choke Lever
3. Fuel Cap
4.
5. Throttle Lock
6.
7. Throttle Trigger
8. Rear Handle
9. Front Handle
10.
11. Upper shaft
12. Knob
13.
14. Hanger Cap
15.
16. Bracket
17. Pin
18. Upper shaft slot
19. Captive nut
20. Latch
21.
22. Quick release tab
ASSEMBLY
UNPACKING
This product requires assembly.
12
authority for advice.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any tool
for prolonged periods, ensure you take regular
breaks.
Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, do not operate
this tool until the parts are replaced. Failure to heed
WARNING
Do not attempt to modify this product or create
product. Any such alteration or modification is
misuse and could result in a hazardous condition