Bluetooth Playback; Connecting Bluetooth Devices; Playing Music Via Bluetooth; Aux Playback - Sonoro SO-220 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CD Resume
The CD will resume playback from the last played
position, even if you have switched modes or switch
the device to Standby mode. This function is termi-
nated when you eject the CD. This function is
intended for audio books, for example.
13

Bluetooth playback

13.1

Connecting Bluetooth devices

Mobile phones and other Bluetooth-enabled devices
can be connected to the radio via Bluetooth.
i
If necessary, use the manual of your mobile phone
or your device for help.
1.
Switch on the device.
Fig. 47: Searching for Bluetooth
2.
Press the [MENU] button and select [Bluetooth]
mode or press the [Bluetooth] button on the
remote control.
ð The Bluetooth symbol flashes and the display
shows the [Search] text (Fig. 47).
3.
Switch on the Bluetooth function of your mobile
phone or device and select "sonoroCD 2" from
the list of Bluetooth devices found.
ð The two devices are connected.
i
The radio can connect to up to 8 devices and con-
nects automatically to previously configured
devices if Bluetooth is enabled.
13.2
Connecting Bluetooth devices
Stored Bluetooth devices are connected automati-
cally.
1.
Activate Bluetooth mode.
ð The Bluetooth symbol flashes and the display
shows the [Search] text (Fig. 47).
70
Fig. 48: Connecting Bluetooth devices
2.
Switch on the Bluetooth function of your mobile
phone or device.
ð After pairing, the display permanently shows
the [Bluetooth] text.
13.3

Playing music via Bluetooth

n To start playback, press the [Play/Pause] button or
the click wheel.
n To interrupt (pause) playback, press the
[Play/Pause] button or the click wheel.
14

AUX playback

You can connect and play additional audio devices via
the AUX port on the back of the device.
Fig. 49: Activating AUX playback
1.
Switch on the device.
2.
Press the [MENU] button and select [AUX] mode
or press the [AUX] button on the remote con-
trol.
ð The display shows the [AUX] symbol (Fig. 49).
3.
Connect the external device to the AUX port
using a cable.
4.
Turn on the external device and start playback
on the external device.
i
You cannot operate an external device using the
buttons on the radio.
15

USB playback

You can connect additional devices to the radio and
play music through the USB Charge & Playback port
on the back.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sonorocd 2

Table des Matières