Setting The Sound; Setting The Sleep Timer - Sonoro SO-220 Mode D'emploi

8.4 Setting the sound

You can adjust the audio playback's sound using the
bass and treble settings.
Fig. 23: Setting the sound
1. Go to the corresponding submenu or press the
corresponding button on the remote control.
2. To adjust the bass, select [Bass] (Fig. 23/A) and
turn the click wheel. To adjust the treble, select
[Treble] (Fig. 23/B) and turn the click wheel.
i
Alternatively, you can also use the [Next] or
[Previous] buttons to adjust the values.
3. Press the click wheel to adopt the settings or
wait 10 seconds.

8.5 Setting the Sleep Timer

The Sleep Timer is an automatic power-off function
that switches the device to Standby mode after the
specified time has expired.
Setting the Sleep Timer
Fig. 24: Switching on/off the Sleep Timer
1. Press [SLEEP] button on the top of the device or
the remote control.
ð The display shows the [SLEEP] symbol
(Fig. 24/1).
Switching off the Sleep Timer
2. To switch off the sleep timer, press the [SLEEP]
button again.
ð The symbol on the display is hidden.
i
If the device was switched off by the Sleep Timer,
it will start in the last heard mode when you turn it
on again.
62
Setting the time interval for the Sleep Timer
Fig. 25: Setting the time interval for the Sleep Timer
1. Hold down the[SLEEP] button on the top of the
device or the remote control.
ð The Sleep Timer appears (Fig. 25) and the
Sleep symbol flashes (Fig. 25/1).
2. Turn the click wheel to select the desired time
interval length (Fig. 25/2). The maximum time
interval is 120 minutes.
i
Alternatively, you can also use the [Next] or
[Previous] buttons to adjust the values.
3. Press the click wheel to confirm the entry.
When the specified time expires, playback gradually
fades out.
Dimming light (sunset)
In addition to a Sleep Timer, you can also dim or
switch off a connected lamp (only in conjunction with
sonoroLIGHT).
1. Ensure that sonoroLIGHT is connected and that
its dimmer function is switched on.
2.
Switch on the light Ä Chapter 8.6 'Switching the
light on and off' on page 63.
3. Program a Sleep Timer.
ð After the Sleep Timer has elapsed, the light is
reduced gradually and is switched off after
40 seconds.
i
If you press the [Standby] button during
the Sleep Timer, the light remains
switched on.
If you press the [Light] button while the
light is being dimmed, the light is
switched off immediately.