Sonoro SO-220 Mode D'emploi page 61

Setting the date format
Fig. 16: Setting the date format
You can set three different date formats (Fig. 16/A, B
and C) as well as the current day. The configuration
options are:
n A: Current day, month, year.
n B: Current month, day, year.
n C: Current month (in words), day, year.
Setting display dimmer
Fig. 17: Setting display dimmer
Depending on the ambient brightness, the display is
switched to bright or dark. The ambient brightness is
detected by a sensor beside the display.
You can set the desired brightness level.
n Display High: Level 08 to 15 (Fig. 17/A)
n Display Low: Level 01 to 08 (Fig. 17/B)
Setting alarm light
Fig. 18: Setting alarm light
In addition to the alarm, you can also be woken up in
the mornings with a light that gets gradually brighter
(only in conjunction with sonoroLIGHT).
To this end, you can proceed as follows to set the
desired brightness of the alarm light and the time-
frame in which the alarm light should reach this
brightness:
n Brightness: 01 to 32 (Fig. 18/A)
n Alarm light: 0 to 60 min (Fig. 18/B)
Setting the automatic time/date update function
Fig. 19: Setting the automatic update function
You can select the automatic update function in the
[Set Time] submenu (Fig. 19). Switching on this func-
tion automatically synchronizes the time and date in
the FM radio and DAB radio operating modes.
Setting the display language
Fig. 20: Setting the language
You can set the language for the menu and the play-
back display (Fig. 20). The following languages are
available:
n English,
n German and
n French
Switching Demo Sound on/off
Fig. 21: Switching Demo Sound on/off
You can switch the Demo Sound function on or off
(Fig. 21).
Resetting the device to the factory settings
Fig. 22: Resetting to the factory settings
If necessary, you can reset all specified settings, such
as language and time formats and saved stations, to
the default factory settings (Fig. 22).
61