Navman iCN 700 Série Guide D'installation page 13

How do I remove old maps from my iCN?
You cannot use a 2006 map and a 2006 SE map of the same area at the same time.
Complete the following steps for each map you are upgrading:
1.
Open Smart
Start > All Programs > Navman > SmartST Desktop 2006
2.
Click the View/Remove Maps tab.
The View/Remove tab will open, displaying a list of installed maps.
3.
Select the name of the map you want to remove from the list, then click Remove.
4.
Confirm that you want to remove the selected map when prompted.
The map is removed from your iCN.
Desktop, if it is not already open:
iCN 700 Series - Map Installation Guide
13