Navman iCN 700 Série Guide D'installation page 10

iCN 700 Series - Map Installation Guide
3.
Select your preferred language for Smart
4.
Click Install SmartST Desktop.
5.
Follow the screen prompts to install Smart
Review and accept the Licence Agreement for Smart
Microsoft ActiveSync (if not already installed on your computer) when
prompted.
Select a destination folder for Smart
When the installation has finished, click Finish.
Smart
6.
If prompted to connect your iCN to your computer, complete the following:
Plug the large end of the USB cable directly into a USB port on your
computer (not a USB hub) and plug the small end into the USB Socket (
on the side of your iCN.
Where possible, plug the USB cable into a USB port at the back of your computer.
Plug the small end of the AC Power Pack cable into the
side of your iCN; plug the other end into the mains.
Press
Your iCN will turn on.
Desktop will open.
.
Desktop.
Desktop:
Desktop when prompted.
10
Desktop and
socket on the
)