To Order; Spare Parts And Accessories; Warranty; Battery And Fuse Change - Metrix MX 1 Notice De Fonctionnement

Supply

To order

•
Delivery
•
•
•
•
•
•
Spare parts and
•
accessories
•
Different measurement accessories widen the scope of application or
provide the altimeter with new functions.
Documentation on request.
•
•
•
•
•

Warranty

Our warranty lasts three years for the multimeter and one year for the
Warranty
accessories after the delivery date except for express stipulations (extract
from our General Sales Terms provided on request).
Maintenance
Only use the specified spare parts for maintenance. The manufacturer shall
not be held liable for any incident occurring following repairs carried out by a
party other than its after-sales service or approved repairers.
Opening the multimeter:
Battery and fuse
change
Open the device by removing the measurement leads and taking out the four
screws on the back. Remove the lower part of the casing.
Open the device. Change the battery if the buzzer does not function when the
Changing the
VΩ and COM inputs are in short-circuit on the W x 1 calibre. Ensure that the
battery
battery is the right way up.
20
1 MX1 multimeter
1 set of 2 leads with tips
4 fuses, 2 spares
1 fitted 1,5V battery
1 instructions leaflet
1 strap on the back of the casing
...................................................P01296033
1 LR6 1,5V battery
1 HPC fuse 1,6A / 6,3x32 / 600V / 50kA
1 HPC fuse 10A / 6,3x32 / 600V / 50kA
Current clamp : ratio 1000/1 (MN08) ........................... P01120401
Carry case 240 x 230 70mm with strap
................................................P01295084
Set of leads with tips
............................................P01101848
Set of crocodile clamps
30kVDC high voltage probe, ratio 100/1
English
...................AT0071
....................AT0070
......................P01298033
....................HT 212
Multimeter MX1