Adjustment Procedure For Dolby Surround; Setting The A.processor - Alpine IVA-W505 Mode D'emploi

Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
1
Speaker Setup (page 49)
(Turning the speakers to be used on and off and
setting their response)
2
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
3 Mixing bass sound to the rear channel
(page 48)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
4
Adjusting the acoustic image (page 48)
(Adjusting the acoustic image to achieve a sound as
if the center speaker were directly in front of the
listener)
5
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
6
Adjusting the DVD Level (page 49)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes)
Storing Settings in the Memory (page 50)
7
(Storing all the settings and adjustments made on the
IVA-W505 (not only the above settings/adjusts) in the
memory)
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
44
-EN

Setting the A.PROCESSOR

1
Check that Defeat mode is off (page 26).
2
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
3
Touch [AUDIO SETUP].
The AUDIO SETUP screen appears.
4
Touch [ ] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
5
Touch [ ] , [ ] or [
change its setting.
Setting items:
MEDIA XPANDER / BASS SOUND CONT. / DOLBY PLII/REAR
FILL / X-OVER / T.CORR / PHASE / G-EQ / P-EQ / SPEAKER
SELECT / MULTI CH SETUP / SPEAKER SETUP / DVD LEVEL /
PCM MODE
• Touching [ESC] will change to the main source screen.
• Touching [ ] to return to the previous screen.
Setting the MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to "AUTO" when the PXA-H700 is connected.
Setting item: MEDIA XPANDER
1
Select ON or OFF of MX by touching [ ] or [ ] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
2
Touch [ ] after setting to ON.
The MEDIA XPANDER setup screen appears.
3
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3) / MX SAT (OFF, SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
] etc., of the desired item to