Linear Luminance Control) Setup; L.l.c. Setting Operation; Picture Quality Darkness Adjustment Function (L.l.c.); Selecting The Visual Eq Mode (Maker's Setting) - Alpine IVA-W505 Mode D'emploi

L.L.C. (Linear Luminance
Control) Setup

L.L.C. Setting Operation

To display the L.L.C. mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the L.L.C. mode operation has been
released. Engaging the parking brake can reactivate the L.L.C.
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of "To
display the L.L.C. mode screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the L.L.C. mode screen."
The following steps 1 to 4 are common operations to each
"Setting item" of L.L.C. Setup. Refer to each section for details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [L.L.C. SETUP].
The L.L.C. SETUP screen appears.
3
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
L.L.C.* VISUAL EQ*
CONTRAST SHARP*
* The setting is available in the visual source mode (except navigation
screen).
4
Touch [ ] to return to the previous screen.
Touch and hold [ ] for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc through the screen displayed.
Picture Quality Darkness Adjustment
Function (L.L.C.)
This function allows picture darkness (brighter black/deeper black) of a
dark scene to be adjusted.
Setting item: L.L.C.
Setting contents: OFF / 1 / 2 / 3 / 4 / 5
You can adjust the level of picture adjustment effectiveness
between 1 and 5.
1 2
Darker Brightness Darkness Balance
40
-EN
BRIGHT COLOR* TINT*
USER MEMORY*
3 4 5
Brighter
Selecting the VISUAL EQ Mode (Maker's
setting)
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
OFF (FLAT): Initial Setting
NIGHT M.: Suitable for movies in which dark scenes
frequently appear.
SOFT: Suitable for CGs and animated films.
SHARP: Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1: Recalls the VISUAL EQ mode being stored on
preset No.P-1 from "Storing VISUAL EQ"
(page 41).
P-2: Recalls the VISUAL EQ mode being saved on
preset No.P-2 from "Storing VISUAL EQ"
(page 41).
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
"CUSTOM" is displayed.

Adjusting Brightness

Setting item: BRIGHT
Setting content: -15 ~ +15
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car's interior lighting as
long as AUTO is set in "Setting the Brightness of the Backlighting"
(page 35).

Adjusting Color of Picture

Setting item: COLOR
Setting content: -15 ~ +15
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
• Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.

Adjusting Tint of Picture

Setting item: TINT
Setting content: G15 ~ R15
Adjust the color from G15 to R15. "G MAX" or "R MAX" is
displayed at the maximum of each color.
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When setting PAL, you can not adjust the TINT.