Alpine IVA-W505 Mode D'emploi page 272

Indication for SAT Receiver Mode
• The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
(XM mode)
(SIRIUS mode)
• XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
(XM mode)
(SIRIUS mode)
• The channel currently selected has stopped broadcasting.
- Select another channel.
• The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
• There is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
Indication for iPod Mode
• The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the IVA-W505.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
unit, using the iPod cable.
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
3
• Indication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
unit, using the iPod cable.
Indication for USB memory
CURRENT ERROR
• Abnormal current is run to the USB connector device.
USB memory is a malfunction or it is shorted.
- Connect another USB memory.
USB DEVICE ERROR
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
NO USB DEVICE
• A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
• A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
3
• Indication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
unit, using the iPod cable.
81
-EN