Displaying The Numeric Keypad Input Screen - Alpine IVA-W505 Mode D'emploi

Returns to the previous screen.
Changes to the REAR selection screen when "Setting
the Picture Output" (page 39) is set to ON.
A The information about the current source.
e.g. The DISC image, Track NO. and Track time will be
displayed in DISC mode.
2
Touch [RADIO].
The screen changes to the Radio mode main display.
Display example for FM Radio main screen
Changes to the SOURCE selection screen (to Step 1
screen)
Displays the source name, such as radio band, etc.,
that is selected
Changes the display style, refer to "Selecting the
Display Style" (on page 14).
Display time and volume level
Function Guide:
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]* or [P1/3]* on the function guide, and many other
operations can be performed.
* Display may vary depending on the connected devices.
3
Touch [SOURCE] on the main source screen to
change to another source screen, and select the
desired source from the SOURCE selection screen.
• After 5 seconds of each operation in the visual mode, the screen
changes to the visual screen only.
To display the main source screen, touch the display panel, then
touch [ESC] on the screen. The SOURCE selection screen appears
by touching [SOURCE] on the changed main source screen.
Displaying the Numeric Keypad Input
Screen
The numeric keypad input screen is displayed when the DVD mode is
selected for searching a title or chapter. It can also be used for entering a
country code or password for DVD setup, and for selecting a channel
number in the SAT Radio mode etc.
1
Touch [10KEY] on the main source screen.
2
Touch the desired numeric key.
Display example for numeric keypad
Operation buttons of this area can be used while

displaying the numeric keypad input screen.

Input screen area
Closes numeric keypad input screen
All input numbers will be deleted
Previous number will be deleted
Input number is confirmed
Numeric keypad
The numeric keypad input screen closes when the area
is touched while displayed.
3
Touch [ENT] to confirm your entry.
13
-EN