Sine Wave Generator Hm 8037; Specifications - Hameg Instruments HM8037 Manuel

Sine Wave Generator
HM 8037
Frequency Range: 5Hz to 50kHz
Distortion: <0.01%
Digital Frequency Readout, 3 Digit
Output Voltage:
Output Floating (switchable)
High Amplitude Stability
The HM8037 Sine Wave Generator is a high
quality sinusoidal signal source for applications
requiring high stability and spectral purity for
audio/video applications. The low distortion
factor, low noise level and excellent flatness
render this instrument suitable for measurements
of linear or non-linear distortions in high-grade
audio systems. Simplicity of operation of the
HM 8037 is another important feature of this
instrument.
The generator frequency can be precisely tuned
by means of the 3-digit frequency display. A
resolution as fine as 0.1Hz can be obtained in the
lower frequency range. High precision
components are used in the manufacture of this
product, in the frequency generating network
circuitry, which assures an exceptionally high
stability. The flat amplitude of ±0.2dB elimi-
nates the need of constantly monitoring the
voltage level during frequency response testing.
The output voltage of the HM8037 is adjustable
over a 60dB range for examination of sensitive
Hi-Fidelity amplifiers. The 600Ω output can be
switched from chassis (earth) to floating signal
ground, depending on user/circuitry re-
quirements. The HM 8037, in combination with
the HAMEG HM 8027 Distortion Meter, is
suitable for precision distortion measurements.
An entire test system can be created with these
two instruments, which can perform high quality
audio/video system measurements.
Sous réserve de modifications / Reservado el derecho de modificatión
≥ ≥ ≥ ≥ ≥
1.5V into 600Ω Ω Ω Ω Ω

SPECIFICATIONS

(Reference Temperature: 23°C ± 1°C)
Operating Mode:
Sine wave, free-running with AGC
Frequency Range:
5Hz to 50kHz, (4 decades)
Variable control 10:1, overlapping the ranges
Frequency Drift:
(Frequency control in center position)
15 min. 0.08%
8 hrs. 0.6%
15 min. 0.08%
8 hrs 0.5%
Display:
3-digit 7-segment LED display
Accuracy:
Distortion:
5Hz to 20Hz:
20Hz to 10kHz:
1kHz:
10kHz to 20kHz:
20kHz to 50kHz:
Output (short-circuit-proof):
Output Voltage:
Output Impedance:
Amplitude Flatness:
(5Hz to 50kHz)
Attenuation:
2 Attenuators 20dB±0.2dB each
Variable control:
Amplitude Stability:
Synchronizing Output (short-circuit-proof)
Output Voltage:
Output Impedance:
General Information:
Output floating
(ground connection switchable)
Supply voltages
+5V/120mA;
+15V/30mA;
–15V/30mA
(∑ = 6.3W)
Operating conditions:
max. relative humidity:
Dimensions without 22-pin flat connector
(W x H x D):
Weight:
Values without tolerances are meant to be
guidelines and represent characteristics of the
average instrument.
(50kHz range)
(50kHz range)
(other ranges)
(other ranges)
±1 Digit
max. 0.03%
max. 0.01%
typ. 0.005%
max. 0.03%
max. 0.05%
1.5V into 600Ω
approx. 600Ω
max. ±0.2dB
min. 60dB
0dB to 20dB min.
0.12% (4 hours)
2V , Sine wave
pp
approx. 1kΩ
(from HM8001-2):
+10°C to +40°C
135 x 68 x 228 mm
approx. 650g
80%
17