Horizon Hobby Arrma 4x4 3S BLX Vehicle Mode D'emploi page 18

Bind socket
Insert the Bind Plug in the
BIND port on the receiver.
Center the ST TRIM and TH
TRIM dials on the transmitter.
Remove the Bind Plug, then
power off the ESC to save the
settings.
Connect a fully charged battery
pack to the ESC.
Power the transmitter on.
Power off the transmitter.
18
Power on the ESC. The red
LED flashes, indicating the
receiver is in bind mode.
The receiver LED will stop
flashing.
WWW.ARRMA-RC.COM