Replacing The Oven Light; Removing The Storage Drawer - IKEA TVARSAKER Mode D'emploi

CARE AND CLEANING

Replacing the Oven Light

CAUTION
Be sure the oven is unplugged and all parts are
cool before replacing the oven light.
Replacing the oven interior light bulb:
The interior oven light is located at the rear of the
oven cavity and covered with a glass shield. The
glass shield must be in place whenever the oven is
in use (Figure 27).
1. Turn electrical power off at the main source or
unplug the appliance.
2. Remove the interior oven light shield after re-
moving the wire holder by carefully moving the
wire to the side of the glass shield. The tension
from the wire holds the glass shield in place.
3. Pull the shield straight out. Do not twist or turn.
4. Replace the bulb with a new appliance bulb.
5. Replace the glass oven light shield. Replace wire
holder.
6. Turn the power back on again at the main
source (or plug the appliance back in).
7. Be sure to reset the time of day on the clock.
glass
shield
wire
holder
Figure 27: Oven light protected by glass shield
42

Removing the Storage Drawer

Use the storage drawer for storing cooking utensils.
The drawer can be removed to facilitate cleaning
under the range. Use care when handling the
drawer.
Figure 28: Open storage drawer
Figure 29: Closed storage drawer
EN