Setting Convection Convert; Setting Delay Start - IKEA TVARSAKER Mode D'emploi

EN

Setting Convection Convert

Pressing the Convect Convert key automatically
converts the cooking temperature entered for any
standard baking recipe to the lower temperature
required for convection baking.
To set the oven for convection bake with a
standard baking recipe temperature of 400°F:
1. Arrange interior oven racks.
2. Press Conv Bake.
3. Press 4 0 0.
4. Press Conv Convert.
5. Press OK/START.
6. Place food in the oven.
Important:
• Convection convert may only be used with the
Convection Bake function.
• When using convection convert, bake time reduc-
tions may vary depending on the oven set tem-
perature.
• If the oven door is opened when any convection
function is active, the convection fan will stop
rotating until the oven door is closed.
• Do not open the oven door often. Opening the
door will reduce the temperature in the oven and
may increase the cooking time necessary for best
results.
CAUTION
Always use pot holders or oven mitts when using
the oven. When cooking the oven interior, oven
racks, and cooktop will become very hot which can
cause burns.

Setting Delay Start

Use the Start Time key to delay the starting time
(delayed timed bake). The oven will turn on at a
later time and stop automatically after the set bake
time ends.
WARNING
Food poisoning Hazard. Do not let food sit for
more than one hour before or after cooking. Doing
so can result in food poisoning or sickness. Foods
that can easily spoil such as milk, eggs, fish, meat
or poultry, should be chilled in the refrigerator first.
Even when chilled, they should not stand in the oven
for more than 1 hour before cooking begins, and
should be removed promptly when finished cooking
To program oven for a delay start beginning at
5:30, and for baking at 375°F:
1. Press Bake. Enter 3 7 5 using numeric keypad.
2. Press Delay Start.
3. Enter 5 3 0 using numeric keypad.
4. Press OK/START to accept.
The oven will turn on when the delay start time
(5:30) is reached.
IMpORTANT
Delay Start may be set using a 24 hr clock. To set
clock for 24 Hr operation, See "Setting 12 Hour
or 24 Hour display mode" in this section for more
information. The Delay Start feature may be used
with Convection Bake, Convection Roast, Convec-
tion Convert, Bake, and Self Clean functions. Delay
Start or Bake Time will not operate with the broil
function.
OVEN CONTROLS
27