Alliance Laundry Systems DRY725C_SVG Guide De L'utilisateur page 18

Troubleshooting
Dryer Symptom
Clothes are too wrinkled
Clothes have odor
Cycle advances too slowly
Er, ro on digital display
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Possible Cause/Solution
• Check heat setting. Overdrying can cause wrinkling.
• Check load size. Large loads may not tumble properly and may
cause wrinkling.
• Check room for odors before drying clothes. Any odor (fried
foods, paint, varnish, cleaners, burning wood, etc.) will transfer
to clothing as the dryer draws air from the room.
• Ventilate room before drying clothes.
• When in an Auto-Sensing cycle, the time it takes depends on
the type and size of the load being dried. When clothing has
more moisture, the cycle takes longer than when the clothes
are more dry.
• The dryer' s motor overload protector has cycled.
• The control can be cleared by pressing the Start/Pause button
and the dryer can be restarted by pressing the Start/Pause
button again.
• If this code is displayed again, remove the dryer from use and
call a service person.
18 Part No. D516314ENR1