To Dry Clothes - Alliance Laundry Systems DRY725C_SVG Guide De L'utilisateur

Heating
Cooling
Extended
NOTE: The Heating or Cooling status light flashes (1
second on/1 second off) during the warm-up period. The
status light stays lit until the motor starts running.

To Dry Clothes

IMPORTANT: Refer to the INSTALLATION INSTRUC-
TIONS before using dryer.
IMPORTANT: Before using dryer for the first time, use an
all-purpose cleaner or a detergent and water solution
and a damp cloth to remove shipping dust from inside of
dryer drum.
1. Sort items into separate loads.
NOTE: Remove all objects from pockets such as
lighters and matches.
NOTE: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.
2. Clean lint filter.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
The Heating status light is lit
to indicate that a heat portion
of the cycle is currently operat-
ing.
The Cooling status light is lit
during the cool-down portion of
the cycle.
The Extended status light is lit
during the Anti- Wrinkle cycle
extension.
TLW1991N_SVG
1
1. Lint Filter
To reduce the risk of fire and risk of lint collecting
in exhaust duct, do not operate dryer without lint
filter in place.
3. Load dryer half full with laundry ( 8.2 kg [18 pounds] ) maximum
dry clothes load). Add fabric softener sheet, if desired.
NOTE: To avoid damage to dryer, do not use more
than one fabric softener sheet per load.
4. Close loading door. Dryer will not operate with the door open.
13
Operating Your Dryer
DRY2757N_SVG
Figure 1
WARNING
DRY2543N_SVG
DRY2026N_SVG
Part No. D516314ENR1
W771