Selecting The Operating Mode - EdilKamin LOGO Installation, Usage Et Maintenance

ignition shutdown button
+
button to increase the power operating temperature (when inside a menu, it increases the displa ed variable)
-
button to decrease the power operating temperature (when inside a menu, it decreases the displa ed variable)
A
button to switch to the "E S
M
button to toggle from automatic to manual mode and vice versa
TEMPERATURE DETECTED BY THE REMOTE CONTROL
he remote control is equipped with an internal sensor to detect the room temperature and displa it in real time.
he detected temperature is transmitted periodicall to the control board of the insert stove if the transmission LE of
the remote control and the receiving sensor of the s noptic panel of the insert stove are in each other s eld of view.
f the temperature of the remote control does not reach the control board of the insert stove for over
temperature detected b the sensor connected to the s noptic panel is used.

SELECTING THE OPERATING MODE

he following functions can be scrolled through and set b brie
temperature ad ustment in automatic mode
manual ad ustment of the power
manual ad ustment of the ventilation
INSTRUCTIONS FOR USE
ER " program
- 31
ndicates data transmission between the remote control and the
control board.
blocked ke pad; avoid turning on the remote control
for no reason (press " " and " " simultaneousl for
a few seconds to block unblock the ke pad)
at batter ( mini alkaline batteries t pe
ndicates that ignition shutdown is being via the "E S
ER" program
ndicates the room temperature detected b the remote control
(it indicates the values of the set parameters during its technical
set-up).
ndicates that a setting has been transmitted for
the stove to ignite
fan speed indicator
pellet air stove remote control setting indicator
automatic function
(the temperature value appears on the displa )
manual ad ustment function
(the operating power value appears on the displa )
pressing the " " button
-
)
minutes, the