Ventilation Setting; Setting Date And Time - EdilKamin KIKKA PLUS Installation, Usage Et Maintenance

VENTILATION SETTING

Press the button for a few seconds and scroll down the
parameters in the display using the same button until it displays
the term "FAn1" and confi rm with the
This sub-menu allows you to vary the fan speed.
With the and buttons you can set the speed
manually from 0 to 10, or set the speed to automatic mode
("Auto").

SETTING DATE AND TIME

Press the button for a few seconds and scroll down
the parameters on the display using the same button until it
displays the word "Menu".
Confi rm with the button and scroll through the Menu
using the button until it displays the word "Time" (to set
the time) or the word "Date" (to set the date) and confi rm with
the button.
Once you have selected the "Time" setting, you can enter the
sub-menu dedicated to setting the hours ("Hour") and minutes
("Min").
To increase/decrease the hours and/or minutes, you always use
the and/or buttons.
Confi rm with the button.
To return to the previous Menu display, select "quit".
Confi rm with the button and press the
until it displays the word "quit" and press the
Once you have selected the setting "Date", you can enter the
sub-menu for setting the day ("Days"), month ("Mont") and
year ("Year").
To increase/decrease the hours and/or minutes, you always use
the and/or buttons.
Confi rm with the button.
To return to the previous Menu display, select "quit".
Confi rm with the button and press the
until it displays the word "quit" and confi rm with the
button.
INSTRUCTIONS FOR USE
button.
button
button.
button
- 44
SETTING DUCTING
Press the button for a few seconds and scroll down the
parameters in the display using the same button until it displays
the term "FAn2" and confi rm with the
The regulations admitted for the canalisation are the same that
for ventilation
ACTIVATING THE THERMOSTAT-TIMER
Press the button for a few seconds and scroll down
the parameters on the display using the same button until it
displays the word "Menu".
Confi rm with the button and scroll down through the
Menu, using the button until it displays the message
"ProG" and confi rm with the
To activate the thermostat-timer, press the
message "P on" is displayed.
Confi rm with the button.
At this point, the LED indicating that the termostat-timer is
active is displayed .
To deactivate the thermostat-timer, press the
and the message "P off" is displayed. Confi rm with the
button.
At this point, the word "ProG" appears on the display. Scroll
down through the Menu by pressing the
when the word "quit" is displayed confi rm with
ton, scroll down by pressing the
"quit" is displayed and press the
-
button.
button.
button and the
button
button and
but
button until the word
button.