Important Safety Precautions - Jiffy Pro II LECTRIC Mode D'emploi

IMPORTANT SAFETY PRECAUTIONS

Please read this manual carefully. Operate your equipment according
to the safety instructions and recommendations found throughout this
manual. Anyone who uses this equipment must read and fully
understand the instructions and be familiar with its operation.
CAUTION
CAUTION INDICATES YOU CAN OR YOUR EQUIPMENT
CAN BE HURT IF THE SAFETY INSTRUCTIONS THAT
FOLLOW THIS SIGNAL ARE NOT OBEYED
IMPORTANT
INDICATES HELPFUL INFORMATION FOR PROPER
ASSEMBLY, OPERATION, OR MAINTENANCE OF YOUR
EDQUIPMENT.
To receive the greatest possible performance and satisfaction from
your Jiffy Power Ice Drill, and to reduce the risk of injury, it is important
that you read and understand the assembly, operating, maintenance,
and safety instructions before using your Jiffy Power Ice Drill. Contact
Feldmann Engineering if you do not understand any of the instructions
in this manual.
Your Jiffy Power Ice Drill is designed and manufactured to provide safe
and dependable operation, provided it is operated in accordance with
the following safety precautions.
Preventing accidents is the responsibility of every power equipment
operator. The safety precautions identified in this manual must be fully
understood and followed by every operator of this Jiffy Power Ice Drill.
Review the safety precautions frequently and never take chances.
Take the time to become familiar with your Jiffy Power Ice Drill and its
components, then operate it in a safe manner. Study the appropriate
sections of this manual for the description of the controls and function
of your Jiffy Power Ice Drill.
persons who use your Jiffy Power Ice Drill.
The PROII Lectric™ is designed for use with a Jiffy left hand
(counter-clockwise) rotation ice drill ONLY.
NEVER try to reverse the direction the rotation of the drill. This
can result in damage and/or serious bodily injury.
When using an external battery source to operate your Jiffy
PROII Lectric™, use ONLY the Jiffy Cable Assembly (#3917),
Wiring Harness (#3939), or Extension Cable (#3929) designed
exclusively for the Jiffy PROII Lectric™ power head.
After the Jiffy Cable Assembly (#3917) is attached to the PROII
Lectric™ power head, attach the red clamp to the positive [+]
battery post and the black clamp to the negative [-] battery post.
Failure to do so can result in electrical damage to the unit and/or
serious bodily injury.
Avoid mishandling and abuse of your Jiffy Power Ice Drill. Handle
it with care, as any rough treatment can cause damage to your
Jiffy Power Ice Drill or it can cause a malfunction.
Avoid unintentional starting.
transporting the PROII Lectric™ from hole to hole while on the ice
Teach the safety precautions to all
Use extreme caution when
If drill lodges in the ice while drilling holes, release pressure from
the throttle assembly and pull drill from the hole.
(Keeping the throttle assembly engaged when the auger is not
turning can drain your battery and seriously damage your ice
drill.)
Disconnect the connection pin from throttle assembly before
transporting or servicing your ice drill.
Connected
DO NOT SMOKE AROUND BATTERY
Batteries can explode causing severe injury.
Oxygen gases are produced during normal battery operation.
This mixture can explode if flames or sparks are brought near the
battery.
+ Never modify your Jiffy Power Ice Drill in any way. Only Jiffy ice
drills and accessories supplied by Feldmann Engineering or
expressly approved by Feldmann Engineering for use with your
Jiffy Power Ice Drill are authorized for connection and use. The
use of non-Jiffy or unauthorized components may cause damage
or injury.
Check the tightness of screws, nuts, and bolts at regular intervals
and re-tighten if necessary.
Do not wear loose clothing while operating your Jiffy Power Ice
Drill and keep all clothes and parts of the body (hands, feet, etc.)
clear of the rotating ice drill assembly to avoid being drawn into
the boring drill.
By wearing cleated or spiked shoes, or ice creepers when using
your Jiffy Power Ice Drill, you will find it easier to control the
rotational torque as you drill holes in the ice.
Do not allow children to operate your Jiffy Power Ice Drill at any
time. Do not allow adults to operate your Jiffy Power Ice Drill
without proper operational instructions, including all safety
precautions.
Do not lend or rent your Jiffy Power Ice Drill without providing the
owner's manual. Be sure that anyone who uses your Jiffy Power
Ice Drill understands the information contained in this manual.
Give your complete and undivided attention to the proper
operation of your Jiffy Power Ice Drill. To operate it properly, you
must be in good physical condition and mental health and not
under the influence of any substance (alcohol, drugs, etc.) which
might impair vision, dexterity, or judgment.
+ Using your Jiffy Power Ice Drill may be strenuous. If you have
any condition that may be aggravated by strenuous activity, check
with your doctor before operating your Jiffy Power Ice Drill.
+ Do not operate your Jiffy Power Ice Drill when you are tired.
Fatigue may result in loss of control.
-2-
Start over.
Disconnected
Hydrogen and