Jiffy 3500 Serie Manuel D'utilisation

OPERATING MANUAL/PARTS GUIDE
Thank You for purchasing a Jiffy Ice Drill. When properly maintained
and serviced, we are confident your drill will provide you with many
years of trustworthy performance. This manual contains operating
and safety instructions for the Jiffy Series Power Ice Drill. To receive
the greatest possible performance and satisfaction from your Jiffy
Power Ice Drill, and to reduce the risk of injury, it is important that
you read and understand the assembly, operating, maintenance, and
safety instructions before using your Jiffy Power Ice Drill. Contact
Feldmann Engineering if you do not understand any of the
instructions in this manual.
As with any power tool, safety precautions must be observed with
the Jiffy Power Ice Drill to reduce the risk of personal injury.
Careless or improper use may cause serious injury and/or damage
to your Jiffy Power Ice Drill.
INDEX
General Information ..........................
Warranty.........................................
Important Safety Precautions ................
Pre-Use Procedure ...........................
Assembly of Drill...............................
Oil & Fuel Recommendations...............
To Mix Oil & Gasoline, Fuel Mix Chart....
Fueling............................................
Check Before Starting Your Drill...........
Starting Instructions...........................
Operating/Stopping Instructions............
Maintenance and Adjustments.............
Service & Repair Information...............
Diagram of 2500 Series Parts List.........
Diagram of 3500 Series Parts List.........
MANUFACTURER'S One Year Limited Warranty
(30 days for Commercial and/or Rental Use)
FOR WARRANTY SERVICE - DO NOT RETURN
YOUR DRILL TO THE RETAILER YOU PURCHASED
IT FROM. CALL THE JIFFY® CUSTOMER SERVICE
NUMBER AT 800-344-0712, MONDAY - FRIDAY
FROM 7:00 AM TO 4:30 PM CST, FOR A RETURN
AUTHORIZATION NUMBER AND INSTRUCTIONS.
Feldmann Engineering & Manufacturing Co., Inc. warrants the Jiffy
Power Ice Drill to be made of first quality materials and workmanship
and will, at its option, repair or replace any drill part thereof found to
be defective in such materials and workmanship if returned to the
factory, prepaid within one year from the date of purchase by the
original purchaser. To obtain warranty service or replacement
instructions, you must have prior approval before shipping
package by calling our customer service department at 800-344-
0712 for a return authorization number. Inbound and outbound
transportation charges are paid by the purchaser.
Engineering assumes no responsibility for damage caused by
misuse, careless handling, or where repairs were made or attempted
by an unauthorized person. For replacement parts, call 800-344-
0712, Monday - Friday from 7:00 am to 4:30 pm CST, or go online to
www.jiffyonice.com.
Jiffy Power Ice Drill
PAGE
1
1
2
2
3
3
3
3
3
4
4
4
4
5
6
THE USE OF A 40-1 GASOLINE TO OIL MIXTURE IS
REQUIRED FOR USE IN THIS ENGINE. USE OF ANY
OTHER MIXTURE RATIO MAY DAMAGE YOUR ENGINE
AND VOID THE WARRANTY. THE USE OF GENUINE
JIFFY® OIL IS RECOMMENDED.
Manufactured by:
FELDMANN ENGINEERING & MANUFACTURING CO., INC.
520 Forest Avenue
Sheboygan Falls WI 53085
Phone: 800-344-0712 Monday - Friday from 7:00pm - 4:30pm CST
FAX: 920-467-6169
Feldmann
E-mail:
Website:
Other products include: TurfVent™ Lawn Aeration Equipment, BADGER™
Earth Augers
-1-
Model #_________________
Purchased at______________
Date Purchased___________
Serial #__________________
Drill Size________________
Please complete Owner
Registration Card or register
online at www.jiffyonice.com
admin@jiffyonice.com
www.jiffyonice.com
Form #WM4055 (07/10)