Jiffy 46X treme Mode D'emploi

OPERATING MANUAL/PARTS GUIDE
Thank You for purchasing a Jiffy Ice Drill. When properly maintained and
serviced, we are confident your drill will provide you with many years of
trustworthy performance. This manual contains operating and safety
instructions for the Jiffy Series Power Ice Drill. To receive the greatest
possible performance and satisfaction from your Jiffy Power Ice Drill, and
to reduce the risk of injury, it is important that you read and understand
the assembly, operating, maintenance, and safety instructions before
using your Jiffy Power Ice Drill. Contact Feldmann Engineering if you do
not understand any of the instructions in this manual.
As with any power tool, safety precautions must be observed with the Jiffy
Power Ice Drill to reduce the risk of personal injury. Careless or improper
use may cause serious injury and/or damage to your Jiffy Power Ice Drill.
INDEX
General Information ..........................
Warranty.........................................
About Propane-Fueled Equipment..........
Important Safety Precautions ................
Pre-Use Procedure ...........................
Assembly of Drill...............................
Oil & Fuel Recommendations...............
Fueling............................................
Check Before Starting Your Drill...........
Operating Instructions........................
Maintenance and Adjustments.............
Service & Repair Information...............
Diagram of Main Parts, Parts List.........
Emission Warranty............................
MANUFACTURER'S Two Year Limited Warranty
(30 days for Commercial and/or Rental Use)
FOR WARRANTY SERVICE - DO NOT RETURN YOUR
DRILL TO THE RETAILER YOU PURCHASED IT FROM.
GO TO www.jiffyonice.com TO LOCATE YOUR LOCAL
JIFFY SERVICE DEALER. IF YOU LIVE IN CANADA,
PLEASE CALL 1-800-861-9559
SERVICE.
Feldmann Engineering & Manufacturing Co., Inc. warrants the Jiffy Power
Ice Drill to be made of first quality materials and workmanship and will, at
its option, repair or replace any drill part thereof found to be defective in
such materials and workmanship if returned to the factory, prepaid within
two years from the date of purchase by the original purchaser. Inbound
and outbound transportation charges are paid by the purchaser.
obtain warranty service or replacement instructions, please go to
www.jiffyonice.com to find your nearest Jiffy Service Dealer.
Feldmann Engineering assumes no responsibility for damage caused by
misuse, careless handling, or where repairs were made or attempted by
an unauthorized person. For
www.jiffyonice.com or to an Authorized Jiffy Service Dealer. See Jiffy
Service Dealer listing on the website.
PAGE
1
1
2
2
3
3
4
4
4
4
5
5
7
9
FOR WARRANTY
replacement parts, go online
Your Jiffy 46 X-TREME Drill uses a propane-fueled 4-stroke
engine:
OIL MUST BE ADDED to engine before ice drill is used for the
first time and must be checked regularly after that (see page
4).
Propane tank (sold separately) must be attached to engine
and connected to fuel-line before starting engine (see page 4).
Your Jiffy 46 X-TREME Ice Drill must be transported, stored or
placed on the ice with engine spark-plug facing upward or
with powerhead in upright (operating) position. Failure to do
so may result in oil leakage, excessive exhaust smoke or
engine damage.
To
Manufactured by:
FELDMANN ENGINEERING & MANUFACTURING CO., INC.
520 Forest Avenue Sheboygan Falls WI 53085-2513
E-mail: admin@jiffyonice.com
Website: www.jiffyonice.com
to
Other products: TurfVent™ Lawn Aeration Eqt - www.turfvent.com
BADGER™ Earth Augers - www.badgeraugers.com
[1]
Model #___________________
Purchased at________________
Date Purchased______________
Serial #____________________
Drill Size__________________
Register online at
www.jiffyonice.com
Form 4606 (08/18)