Important Safety Precautions; Pre-Use Procedure - Jiffy 3500 Serie Manuel D'utilisation

IMPORTANT SAFETY PRECAUTIONS

Please read this manual carefully. Operate your equipment
according to the safety instructions and recommendations found
throughout this manual. Anyone who uses this equipment must read
and fully understand the instructions and be familiar with its
operation.
To receive the greatest possible performance and satisfaction from
your Jiffy Power Ice Drill, and to reduce the risk of injury, it is
important that you read and understand the assembly, operating,
maintenance, and safety instructions before using your Jiffy Power
Ice Drill. Contact Feldmann Engineering if you do not understand
any of the instructions in this manual.
Your Jiffy Power Ice Drill is designed and manufactured to provide
safe and dependable operation, provided it is operated in
accordance with the following safety precautions.
Preventing accidents is the responsibility of every power equipment
operator. The safety precautions identified in this manual must be
fully understood and followed by every operator of this Jiffy Power
Ice Drill. Review the safety precautions frequently and never take
chances.
Take the time to become familiar with your Jiffy Power Ice Drill and
it's components, then operate it in a safe manner.
appropriate sections of this manual for the description of the controls
and function of your Jiffy Power Ice Drill.
precautions to all persons who use your Jiffy Power Ice Drill.
Avoid mishandling and abuse of your Jiffy Power Ice Drill.
Handle it with care, as any rough treatment can cause damage
to your Jiffy Power Ice Drill or it can cause a malfunction.
Should the engine stop while drilling, do not attempt to restart it
while the drill bit is in the hole.
Never attempt to adjust or repair your Jiffy Power Ice Drill while
the engine is running. Avoid possible injury from moving parts
by first stopping the engine.
+ Never modify your Jiffy Power Ice Drill in any way. Only Jiffy
ice drills and accessories supplied by Feldmann Engineering or
expressly approved by Feldmann Engineering for use with your
Jiffy Power Ice Drill are authorized for connection and use. The
use of non-Jiffy or unauthorized components may cause
damage or injury.
+
+
+
+
+
+
+
+

PRE-USE PROCEDURE

Before using your Jiffy Power Ice Drill to drill holes in ice, follow this
procedure to prepare for proper and correct use.
Study the
Teach the safety
-2-
Check the tightness of screws, nuts, and bolts at regular intervals and
re-tighten if necessary.
Do not wear loose clothing while operating your Jiffy Power Ice Drill and
keep all clothes and parts of the body (hands, feet, etc.) clear of the
rotating ice drill assembly to avoid being drawn into the boring drill.
By wearing cleated or spiked shoes, or ice creepers when using your
Jiffy Power Ice Drill, you will find it easier to control the rotational torque
as you drill holes in the ice.
Do not allow children to operate your Jiffy Power Ice Drill at any time.
Do not allow adults to operate your Jiffy Power Ice Drill without proper
operational instructions, including all safety precautions.
Do not lend or rent your Jiffy Power Ice Drill without providing the
owner's manual. Be sure that anyone who uses your Jiffy Power Ice
Drill understands the information contained in this manual.
Give your complete and undivided attention to the proper operation of
your Jiffy Power Ice Drill. To operate it properly, you must be in good
physical condition and mental health and not under the influence of any
substance (alcohol, drugs, etc.) which might impair vision, dexterity, or
judgment.
Using your Jiffy Power Ice Drill may be strenuous. If you have any
condition that may be aggravated by strenuous activity, check with your
doctor before operating your Jiffy Power Ice Drill.
Do not operate it when you are fatigued. Tiredness may result in loss of
control of your Jiffy Power Ice Drill.
Do not carry your Jiffy Power Ice Drill or leave it unattended while the
engine is running.
When transporting your Jiffy Power Ice Drill in a vehicle, properly secure
it to prevent turnover, spillage and damage.
Gasoline is flammable and caution must be used when handling or
storing it.
Do not fill the fuel tank while your Jiffy Power Ice Drill is running, if the
engine is hot, or when your Jiffy Power Ice Drill is in an enclosed area.
Always fill the fuel tank outdoors.
•
Find, read, and understand the Jiffy operating/parts manual.
•
Assemble the components of your Jiffy Power Ice Drill as indicated
in the Assembly of Drill section of this manual.
•
Mix FRESH WINTER BLEND fuel, in a well ventilated outdoor
area as directed in the To Mix Oil and Gasoline, Fuel Mix Chart
section of this manual. Put some fuel into the tank, but no more
than a quarter of a tankful.
•
Re-read and follow the Starting Instructions section of this manual.
•
After allowing the Jiffy Power Ice Drill's engine to idle for a minute
or so, turn it off as indicated in the Stopping Instructions section of
this manual. Drain the remaining gasoline from the fuel tank back
into your pre-mix gas can. Re-start your Jiffy Power Ice Drill and
allow it to run until the fuel is gone. Your Jiffy Power Ice Drill is now
ready for transporting or storage.
•
If the engine does not run satisfactorily, or if you feel it needs an
adjustment of some kind, contact Feldmann Engineering for the
proper repair information. Do not attempt to adjust the engine
operation yourself, only an authorized service person may make
adjustments to your Jiffy Power Ice Drill's engine without
invalidating the unit warranty.