Jiffy ROGUE Mode D'emploi

Tarière à glace

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Thank You for purchasing a Jiffy® Ice Drill. When properly maintained and
serviced, we are confident that your drill will provide you with many years
of trustworthy performance. This manual contains operating and safety
instructions for the Jiffy® Rogue™ Power Ice Drill. To receive the
greatest possible performance and satisfaction from your Jiffy® Power Ice
Drill, and to reduce the risk of injury, it is important that you read and
understand the assembly, operating, maintenance, and safety instructions
before using your Jiffy® Power Ice Drill. Contact Feldmann Engineering if
you do not understand any of the instructions in this manual.
As with any power tool, safety precautions must be observed with the
Jiffy® Power Ice Drill to reduce the risk of personal injury. Careless or
improper use may cause serious injury and/or damage to your Jiffy®
Power Ice Drill.
INDEX
General Information ..........................
Warranty.........................................
Quick start .....................................
Battery Charger Operation and Use.......
Pre-Use Procedure............................
Transporting and Storage...................
Troubleshooting Guide.......................
MANUFACTURER'S five-year limited warranty on powerhead and
drill assembly Two Year Limited Warranty on the battery
(30 days for Commercial and/or Rental Use)
FOR WARRANTY SERVICE - DO NOT RETURN YOUR DRILL
TO THE RETAILER YOU PURCHASED IT FROM. CONTACT
JIFFY® -
www.jiffyonice.com, Email admin@jiffyonice.com, or
. IF YOU LIVE IN CANADA, PLEASE CALL
Phone (920) 467-6167
1-800-861-9559 FOR WARRANTY SERVICE.
Feldmann Engineering & Manufacturing Co., Inc. warrants the Jiffy®
Power Ice Drill to be made of first quality materials and workmanship and
will, at its option, repair or replace any drill part thereof found to be
defective in such materials and workmanship if returned to the factory,
prepaid within five years from the date of purchase by the original
purchaser. Inbound and outbound transportation charges are paid by the
purchaser. To obtain warranty service or replacement instructions or
replacement
parts,
please
admin@jiffyonice.com or Phone (920) 467-6167
Feldmann Engineering assumes no responsibility for damage caused by
misuse, careless handling, or where repairs were made or attempted by
an unauthorized person.
OPERATING MANUAL
PAGE
1
1
2
3
3
3
4
6
6
7
go
to
www.jiffyonice.com,
Manufactured by:
FELDMANN ENGINEERING & MANUFACTURING CO., INC.
520 Forest Avenue Sheboygan Falls WI 53085-2513
E-mail: admin@jiffyonice.com
Website: www.jiffyonice.com
Email
Other products: BADGER™ Earth tools - www.badgerearthtools.com
Model #__________________
Purchased at_______________
Date Purchased____________
Serial #___________________
Drill Size_________________
Register online at
.com
www.jiffyonice
Form 5803 (01/21)

Publicité

Table des Matières
loading

Sommaire des Matières pour Jiffy ROGUE

  • Page 1: Table Des Matières

    As with any power tool, safety precautions must be observed with the Jiffy® Power Ice Drill to reduce the risk of personal injury. Careless or improper use may cause serious injury and/or damage to your Jiffy®...
  • Page 2: Quick Start

    Throttle / Deadman battery is charging. To power your Jiffy® Rogue™ it will have a throttle trigger and a Note: battery is not fully charged when first removed from Deadman trigger. Both triggers will have to be depressed for the the box.
  • Page 3: Usb Operation

    38°C. PRE-USE PROCEDURE IMPORTANT NOTE: Before using your Jiffy® Power Ice Drill to drill holes in ice, follow When transporting your Jiffy® ROGUE™ Ice Drill on an ATV or this procedure to prepare for proper and correct use. snowmobile, it is extremely important to follow these instructions and use caution to avoid damage to the power Find, read, and understand the Jiffy®...
  • Page 4: Important Safety Precautions

    To receive the greatest possible performance and satisfaction insert anything into the charger. from your Jiffy® Power Ice Drill and to reduce the risk of injury, it Do not charge these battery packs with any other type of is important that you read and understand the assembly, charger.
  • Page 5 For safe operation, wear cleated, spiked shoes, or ice Battery Disposal: creepers when using your Jiffy® Power Ice Drill. You will find it 1. The Lithium Ion battery contains corrosive materials easier to control the rotational torque as you drill holes in the which are toxic and must be disposed of properly.
  • Page 6: Maintenance And Adjustments

    Many of these items are the Blade Warranty result of transporting your Jiffy® Ice Drill on a sled or other device Instructions: pulled behind an ATV or snowmobile, where water, slush, and Please send the following information: snow can be thrown up, collect and freeze on these components.
  • Page 7: Troubleshooting Guide

    2. Check to make sure battery is pushed into its locked position 3. Try powering drill assembly without drilling into ice. If the drill stops when powered and not drilling ice contact Jiffy® Customer Service 4. If drill assembly stops at bottom of hole lift up on powerhead handles and start the drill and slowly set back down in the hole and finish drilling hole while lifting up on the powerhead.
  • Page 8 Manufactured by: FELDMANN ENGINEERING & MANUFACTURING CO., INC. 520 Forest Avenue Sheboygan Falls WI 53085-2513 E-mail: admin@jiffyonice.com Website: www.jiffyonice.com...
  • Page 9 Site Internet : www.jiffyonice.com pièces de rechange, allez sur www.jiffyonice.com pour trouver le centre de service à la clientèle Jiffy le plus proche. Les frais de port dans les deux Autres produits: Matériel d’aération des pelouses BADGER sens sont à la charge de l’acheteur. Feldmann Engineering n’assume www.badgerearthtools.com...
  • Page 10 Dôme LED alimenté par batterie au lithium-ion. Votre nouveau foret à glace Jiffy® est Votre Jiffy® Rogue™ sera équipé de 2 lumières LED sur la face alimenté par une batterie de 80 volts / 2.5 ampères qui offre des inférieure de la tête motrice. les lumières s'allumeront lorsque performances de forage supérieures.
  • Page 11: Fonctionnement Usb

    à une utilisation appropriée et correcte. Lorsque vous transportez votre perceuse à glace Jiffy® ROGUE™ sur un VTT ou une motoneige, il est 1. Trouver, lire et comprendre le manuel d'utilisation Jiffy® extrêmement important de suivre ces instructions et de 2.
  • Page 12: Consignes De Sécurité Importantes

    Pour obtenir les meilleures performances et la plus grande ou électrocution : satisfaction possible de votre perceuse à glace électrique Jiffy® et 1. Ne sondez pas le chargeur avec des matériaux pour réduire le risque de blessure, il est important que vous lisiez conducteurs.
  • Page 13 9. Ne laissez pas la batterie au soleil ou dans un environnement très chaud ou froid pendant de longues Ne modifiez jamais votre perceuse à glace électrique Jiffy® périodes. de quelque façon que ce soit. Seuls les perceuses à glace 10.
  • Page 14: Entretien & Réglages

    être perceuse à glace Jiffy® sur un traîneau ou un autre appareil tiré sous l'influence de substances (alcool, drogues, etc.) pouvant derrière un VTT ou une motoneige, où...
  • Page 15 Feldmann Engineering & Mfg Co. Inc. 520 Forest Avenue Sheboygan Falls, WI 53085 USA Jiffy ® lame de garantie - ● Un temps à aiguiser ou remplacement ● expire deux ans après la date d'achat S'il vous plaît Prévoir 3 semaines pour la livraison!
  • Page 16: Rogue™ Guide De Dépannage

    ROGUE™ Guide de Dépannage PRÉOCCUPATION CAUSE POSSIBLE ET ACTION À PRENDRE My drill will not run. 1. Assurez-vous que la batterie est complètement enfoncée jusqu'à ce que vous entendiez un clic et se trouve en position verrouillée. 2. Assurez-vous que la batterie est faible. Chargez si nécessaire.

Table des Matières