Jiffy LECTRIC STX PRO Mode D'emploi

This manual contains operating and safety instructions for
the Jiffy Lectric Power Ice Drill. To receive the greatest
possible performance and satisfaction from your Jiffy
Power Ice Drill, and to reduce the risk of injury, it is
important that you read and understand the assembly,
operating, maintenance, and safety instructions before
using your Jiffy Power Ice Drill. Contact your Jiffy dealer
or Feldmann Engineering if you do not understand any of
the instructions in the manual.
As with any power tool, safety precautions must be
observed with the Jiffy Power Ice Drill to reduce the risk of
personal injury. Careless or improper use may cause
serious injury and/or damage to your Jiffy Power Ice Drill.
INDEX
General Information.............
Warranty............................
General Safety Precautions...
Pre-Use Procedure..............
Assembly of Drill.................
Battery Information..............
Diagram of Main Parts, Parts List
POWER ICE DRILL
OPERATING MANUAL/PARTS GUIDE
Page
Number
1
1
2
2
3
3
4
MANUFACTURER'S
One Year Limited Warranty
(30 days for Commercial and/or Rental Use)
Feldmann Engineering & Manufacturing Co., Inc.
warrants the Jiffy Power Ice Drill to be made of first
quality materials and workmanship and will, at its
option, repair or replace any drill part thereof found
to be defective in such materials and workmanship
if returned to the factory, prepaid within one year
from the date of purchase by the original purchaser.
Inbound and outbound transportation charges are
paid by the purchaser.
assumes no responsibility for damage caused by
misuse, careless handling, or where repairs were
made or attempted by an unauthorized person.
Manufactured by:
FELDMANN ENGINEERING &
MANUFACTURING CO., INC.
520 Forest Avenue
Sheboygan Falls WI 53085-2513
Phone: 920/467-6167
800-344-0712
FAX: 920/467-6169
e-mail: admin@jiffyonice.com
Web Site: www.jiffyonice.com
Form No. WM3920-05B (08/08)
Feldmann Engineering
1