4.1
wiring diagram
WARNING
!
•
Do not wire 110 volts to the valve or wall switch.
This appliance must be electrically connected and grounded in accordance with local codes. In the absence of
local codes, use the current CSA C22.1 Canadian electrical code in Canada or the ANSI/NFPA national electrical
code in the United States.
note:
This appliance is equipped with a 3-prong (grounding) plug for protection against shock hazard and should be
connected into a properly grounded circuit. Do not cut or remove the grounding prong from the plug.
4.0 electrical information
NIGHT
BLOWER
LIGHT
EN
31
W415-2360 / A / 10.31.19