Switching Off The Deep Fryer - T-Fal FAMILY PRO FR4049 Manuel D'utilisation

The timer signals the
end of the cooking time,
but does not stop the
appliance.
For crispy fried food, open
the lid as soon as you
have finished cooking
to prevent steam from
softening the food.

Switching off the deep fryer

• When you have finished frying, move the thermostat down to the
lowest setting, then unplug the deep fryer-
• Allow the oil to cool completely in the fryer (approx. 2 hours).
• Move the fryer using the carrying handles.
Take great care when
handling the food and
use tongs. Gradually
place the food into the
hot oil, submerging it an
inch at a time to prevent
it from sinking too
quickly.
8
• To use a second time, correct the oil level if necessary and plug in the
fryer. The temperature indicator light will go on. Set the thermostat and
the timer to the desired poistion.
• To avoid any risk of burns, never put your hands above the filtration
zone.
fig. 11
.
• The cooking times are a guide only, they may vary depending on the
size of the food, the amount of the food, individual preferences and
the voltage.
• Cooking tips: For the best results, use the traditional French method of
frying homemade French fries :
- first frying at 320°F / 160°C
- second frying at 374°F / 190°C.
• When cooking battered food and doughnuts, remove the wire basket to
prevent food from sticking to it and use tongs to slowly lower the food
into the hot oil.
Never move the fryer
while the oil or fat is still
fig.12
hot-
Table of cooking times
.