Napoleon Vector Serie Manuel D'installation page 50

fi nish framing - after appliance installation
EN
see-thru fl ush
note:
Shaded components (fi nish framing)
must be non-combustible materials.
Finish framing must be built after the
appliance has been placed in its fi nal
position and venting connected.
minimum framing
Ref LV38-1
K
E
F 53 13/16" (136.7cm)
J
L
note:
The LV series requires a minimum enclosure/ceiling height, as illustrated (dimension L), measured from the bottom of
the appliance. For temperature requirements, this area must be left unobstructed. Some venting confi gurations that
require more vertical rise will require a larger enclosure to provide minimum vertical clearance between vent pipes and
combustibles.
50
W415-2034 / C / 04.21.21
Drywall
Insulation
LV50-2
39 15/16" (101.4cm)
16 3/16" (41.1cm)
65 13/16" (167.2cm) 77 13/16" (197.6cm)
Optional - Appliance does not need to be elevated above fl oor
73" (185.4cm)
Ceiling
K
E
F
LV62 LV74
89 13/16" (228.1cm)
91" (231.1cm)
L
J