Before You Use - Elmo MX-1 CONNECT BOX Manuel D'instructions

BEFORE YOU USE

■ Be sure to use the connection cable and the AC adapter supplied with the product.
■ The supplied power cable, the AC adapter, and expansion cable are designed to be used for
the product only. Do not use them for other products.
■ Be sure to use the AC adapter applicable to your local power specifications. If the product was
sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.
■ When storing the product, do not leave it under direct sunlight or by heaters. It may be
discolored, deformed, or damaged.
■ Do not place the product in any humid, dusty, salt bearing wind, or vibrating locations.
Use it under the following environmental conditions:
Temperature: 0°C - 40°C
Humidity: 30% - 85% (No condensation)
■ Use a soft, dry cloth for cleaning.
Do not use any volatile solvent such as thinner or benzene.
■ Follow the guidelines below to prevent the product from dropping or overturning.
• Use the product on a stable base, desk, or table. Do not place the product on an unstable
base or slanted location.
日
本
• Place or wire the product to prevent the power cable, the AC adapter or the video cable from
語
pulling.
■ Pay careful attention when using (including setting-up and storing) or carrying the product.
■ If the product is used for longer than the warranty period, its performance and quality may
deteriorate due to the lifetime of its parts. For parts replacement (on chargeable basis), consult
the dealer from whom you purchased the product or our branch/office near your location.
■ The contents of this document are subject to change without notice. The latest version can be
obtained from the following MX-1 Official Website:
https://www.elmousa.com/
■ It is prohibited under copyright law to use or copy any part or the whole of this document
without our prior written consent.
■ ELMO shall not be liable for any claim for damage or loss of earnings or any claim raised by a
third person due to the use, malfunction or repair of the product.
18