Hendi 209905 Mode D'emploi page 5

• Caution! Securely route the power cord if necessary in order to prevent unintentional
pulling or contact with the heating surface.
• Do not attempt to move the appliance when it is full of hot or cold water as it is heavy.
• Do not clean or store the appliance unless it is completely cooled down.
Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Main parts of the appliance
6
5
4
3
2
1
1. ON/OFF switch
2. Dry boiling protection indicator (Orange) / Heat-
ing indicator (Green)
3. Drain tap
4. Lever
5. Lift up handle
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
6. Steam vent
7. Lid cover handle
8. Lid cover
9. Container
10. Temperature dial
7
8
9
10
EN
5